Network configuration > 13
TCP/IP Tab
This allows you to configure TCP/IP related items.
ITEM EXPLANATION
Use TCP/IP
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/BOOTP Check this item if IP address,
subnet mask, default gateway and
IP addresses for DNS primary
server and secondary servers are
retrieved from the DHCP or BOOTP
server. Otherwise, leave
unchecked.
Use IPv6 Enables IPv6.
IP Address Set the IP address of the selected
network interface card.
Subnet Mask Set the subnet mask of the
selected network interface card.
Default Gateway Set the default gateway of the
selected network interface card.
Auto
Discovery
Configure items related to Network
PnP
Use to select Network PnP and
Bonjour, and to set device name.
DNS
Server…
Set IP addresses for DNS
primary and secondary
servers.
Windows
Rally...
Use WSD Print
Use LLTD
check to enable/disable.
WINS
Server...
Set IP addresses for WINS
primary and secondary
servers and to enter scope
ID.
To Next Page
Loading...
