Network configuration > 14
NetWare Tab
This is where you can configure NetWare related items.
ITEM EXPLANATION
Use NetWare
Protocol
Set NetWare protocol as enabled/disabled.
Use IPX
Protocol / Use
TCP/IP Protocol
Set protocol to use.
Print Server
Name
Set Print Server name.
Frame Type Set primary NetWare frame type.
Operation Mode Set NetWare mode.
Check box
beside Bindery
Setup
Check if you want to use the Bindery mode and Bindery Setup
button becomes available. If it is unchecked, the button is
greyed out.
Bindery Setup Configure items related to Bindery
mode.
In this dialogue box, the following
items can be configured:
Password Set password for Print Server.
Job Polling Time Set print job polling interval in
seconds.
NDS Setup Set NDS tree and context where
Print Server was created.
To Next Page
Loading...
