Oki C711WT - LOADING PAPER; Loading Cassette Trays

Network configuration > 15
EtherTalk Tab
This allows you to configure EtherTalk related items.
RPRINTER
Setup
Available if you select
RPRINTER mode in
Operation Mode.
By selecting the RPRINTER
button, this is displayed:
Here you can specify print servers
to which the printer can be
connected.
Time Out Set duration from the last data’s
arrival to freeing of the port in
seconds.
Printer Name Set the NetWare printer object name.
ITEM EXPLANATION
Use EtherTalk
Protocol
Set EtherTalk protocol to enabled/disabled.
Printer Name Set EtherTalk Printer object name.
Zone Name Set the zone name to which the printer belongs.
ITEM EXPLANATION
xxxxx
xxxxx