Oki C711WT - LOADING PAPER; Multi Purpose Tray Loading

Network configuration > 18
E-Mail (Send) Tab
ITEM EXPLANATION
Use SMTP
Transmit
Check to enable SMTP.
SMTP Server
Name
Enter name of the SMTP server.
Printer E-Mail
Address
Enter the printers e-mail address.
Destination
Address 1 - 5
Set the following parameters:
Destination Address Set E-Mail address to which email
should be sent.
Notify Mode Select PERIOD or EVENT.
When PERIOD is selected:
Check time Used to set the interval at which the
selected events are checked. An e-
mail will be sent at the specified
interval for each event selected.
Period mode Set ENABLE (ON)/DISABLE (OFF) for
the events listed.
When EVENT is selected:
Event Mode Select:
ENABLE (ON), DISABLE (OFF) or
IMMEDIATE (NOWAIT) for the listed
events. If ENABLE (ON) is selected,
the check interval can be set (in
hours and intervals of 15 mins).
Attach Info... Select whichever information is to be included in the e-mail.
Comment... Set up to four lines of text to be included with the e-mail as
comments.
Authentication... Used to set the following security information:
SMTP Authentication
Method
Check to Enable SMTP
authentication.
User ID Set the User ID for Authentication.
User Password Set the User Password for
Authentication.