Network configuration > 19
E-mail (Receive) Tab
Others... Set the following:
SMTP Port Number Set the SMTP port number (default
is 25).
Reply to address Set the E-mail address used for the
[Reply to] field in the mail header.
ITEM COMMENTS
Use POP Receive Enable/disable receiving E-Mail via POP3.
POP3 Server Set the IP address or host name of the POP3 server.
POP3 Server UserID Set User ID for POP3 server.
POP3 Server Password Set a password for the POP3 server.
POP Detail… Set the following:
Use APOP Select if you want to use APOP.
POP3 Port
Number
Set the port number for APOP (default
is 110).
Mail Polling
Time
Set interval to retrieve E-Mail(s) from
the POP3 server. Selectable values,
OFF, 1min, 5min (default), 10min, 30
min, 60 min.
Use SMTP Receive Enable/disable SMTP receive.
Domain Filter… Set the following:
Use Domain
Filter
Enable/disable domain filtering.
Filter Policy Select ACCEPT (the default) or DENY.
Domain Filter Define up to five domain filters.
ITEM EXPLANATION
To Next Page
Loading...
