Oki C813n - Page 28

- 28 -
Preparing Your Printer
1
1. Setup
5 Install the SD memory card (4) into the
SD memory card socket (5).
4
5
6 Install the SD memory socket to the
printer with the screw (6) and tab (7) for
the SD memory card socket and attach
the connector (8).
6
7
8
7 Install the metal plate (2).
(1) First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
2
(2) While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
2
8 Close the access cover (1).
1
9 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
10 Press the scroll button or on the
operator panel.
11 Press the scroll button to select
[Conguration] and press the
<ENTER> button.