- 122 -
Replacing Consumables and Maintenance Units
4
4. Maintenance
3 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
1
2
4 Press the top cover open button (3) and
open the top cover (4).
CAUTIO
Possible to get
burned.
● Since the fuser unit gets hot, carry out the
operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold
it whilst it is hot. Wait until it has cooled
down and then carry out the operation.
3
4
5 Pull forward the left locking lever (5) of
the fuser unit to unlock.
5
6 Hold the fuser unit handle (6) and lift
the fuser unit out of the printer.
6
7 Hold the fuser unit handle (6) and place
the fuser unit into the printer.
6
8 Push back the left locking lever (5) of
the fuser unit to lock.
5
To Next Page
Loading...
