Oki C834DN - Setting the Time that Elapses before Entering the Power Save Mode

- 74 -
Setting the Time that Elapses Before Entering the Power Save Mode
2
2. Printing Basic Operation
●● Setting the Time that Elapses Before Entering the
Power Save Mode
Note
● When a printer is in the power saving mode, press the <POWER SAVE> button to restore from the mode.
● Check if the message “Ready To Print” appears. If the message is not displayed, press the <ON LINE> button.
1 Press the <Fn> key on the operator
panel.
2 Enter “200” using the ten-key pad and
then press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䎃䎱䏘䏐䏅䏈䏕
䎕䎓䎓
䎨䏑䏗䏈䏕 䎃 䎔䎐䎖 䏇䏌䏊䏌䏗 䎃 䎱䏘䏐䏅䏈䏕
3 Press the scroll button or to specify
the time and then press the <ENTER>
button.
䎳䏒䏚䏈䏕䎃 䎶䏄䏙䏈䎃 䎷䏌䏐䏈 䎔䎒䎖
䎖䎃䏐䏌䏑䏘䏗䏈䏖
䎍䎃䎔䎃䏐䏌䏑䏘䏗䏈
䎕䎃䏐䏌䏑䏘䏗䏈䏖
䎗䎃䏐䏌䏑䏘䏗䏈䏖
4 Press the <ON LINE> button.
Memo
● The power save time can be selected from the followings:
- [1 minute]
- [2 minutes]
- [3 minutes]
- [4 minutes]
- [5 minutes]
- [10 minutes]
- [15 minutes]
- [30 minutes]
- [60 minutes]
- [120 minutes]