- 19 -
Preparing Your Printer
1
1. Setup
8 Close the front cover (2).
Note
● The front cover cannot be closed securely if the top cover
is not closed.
2
Installing Accessories
If you want to adjust a direction of air emitted
from a printer, install a louver.
1 Install the supplied louver (1) on the air
vent on the side of the printer.
1
Memo
● Turn a louver to change a direction of air emitted from a
printer.
Loading Paper
Reference
● Please refer to “Supported Paper” P.57 for information
on how to load paper into the printer.
1 Pull out the paper tray (1).
1
2 Set the paper size dial (2) to match the
loading paper size.
Set the dial to [A4 ] when loading the A4 size
paper with a landscape orientation.
A4
A4
A5
A5
2
To Next Page
Loading...
