- 77 -
Changing the Equipment Settings
3
3. Changing Printer Settings
Admin Setup
Item Factory Default Description
Admin Setup Network
Setup
TCP/IP Enable Sets whether to enable TCP/IP.
IP Version IP v4 Selects the version of IP.
NetBEUI Disable Sets whether to enable NetBEUI.
NetBIOS over TCP Enable Sets whether to enable NetBIOS over
T C P.
NetWare Disable Sets whether to enable NetWare.
EtherTalk Disable Sets whether to enable EtherTalk.
IP Address Set Auto Sets the setting method of IP address.
IPv4 Address xxx.xxx.xxx.xxx Sets the IP address.
Subnet Mask xxx.xxx.xxx.xxx Sets the subnet mask.
Gateway Address xxx.xxx.xxx.xxx Sets the gateway (default router)
address.
Web Enable Sets whether to enable Web.
Telnet Disable Sets whether to enable Telnet.
FTP Disable Sets whether to enable FTP.
IPSec Disable Displayed only when [IPSec] is enabled
and only the change to disable is
available.
SNMP Enable Sets whether to enable SNMP.
Network Scale Normal When [Normal] is selected, the printer
works effectively even if connected to a
hub that has the spanning tree feature.
However, the start-up time of printer
becomes longer when the printer is
connected to a small LAN that consists of
two or three computers.
Hub Link Setting Auto Negotiate Sets the method for linking to a hub.
TCP ACK Type1 Sets the type of TCP acknowledgment.
Factory Defaults? (NULL) Resets the Network Setup menu.
Print Setup Personality Auto Selects the printer language.
Copies 1 Sets the number of copies.
Duplex On Sets the duplex printing.
Binding Long Edge Sets the binding position for duplex
printing.
Media Check Enable Sets whether to check if the paper size
of the tray and the page size of the
document do not match.
Resolution 600dpi Sets the resolution.
Toner
Save
Toner Save
Level
Off Sets the toner save level. [Off] disables
the toner save mode. 15% of the toner
is saved in [Low], 35% in [Middle], and
50% in [High].
Color All Sets whether to apply the toner save
mode to the 100% black color.
Mono-Print Mode Auto Sets the print mode for black-and-white
pages.
Default Orientation Portrait Sets the print orientation. Not available
for PS data.
Form Length 64lines Sets the number of lines of text per
page.
Edit Size Cassette Size Sets the size of the printable page area
when no command to specify the paper
edit size is sent from the computer.