- 66 -
How to Print from the MP Tray
2
2. Printing Basic Operation
For Windows PS Printer Driver
1 From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 Select the [Paper/Quality] tab.
4 Select [Multi-Purpose Tray] from
[Paper Source].
5 Click [Advanced].
6 Click [Paper Size] and select a paper
size from the drop-down list.
7 Click [OK].
8 Start printing.
For Mac OS X PS Printer Driver
1 From the [File] menu, select [Page
Setup].
2 Select a paper size from [Paper Size]
and then click [OK].
3 From the [File] menu, select [Print].
4 Select [Paper Feed] from the panel
menu.
5 Select [All] and then select [Multi
Purpose Tray].
6 Start printing.
Paper Output
Your printer outputs to the facedown or faceup
stacker. Paper types that can be outputted to
each stacker are as follows.
Output
Stacker
Supported
paper type
Paper output
capacity
Facedown ● Plain paper
● Recycled
paper
● 250 sheets (when
paper weight is less
than 80 g/m
2
)
Faceup
● Plain paper
● Recycled
paper
● Envelope
● Index card
● Label
● 100 sheets (when
paper weight is less
than 80 g/m
2
)
● 10 sheets (Ultra
Heavy paper and
envelopes)
Note
● Do not open or close the faceup stacker while printing as
it may result in a paper jam.
Using the Facedown Stacker
Paper is delivered with the print side face down,
stacked in the order printed.
Note
● Check that the faceup stacker (1) on the rear side of the
printer is closed. If the faceup stacker is open, paper is
always outputted to the faceup stacker.
1
Memo
● Open the paper supporter (2) so that the printed papers
do not fall down from the top cover.
2
To Next Page
Loading...
