- 22 -
1
1. Convenient Print Functions
For Windows PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 On the [Layout] tab, select the number
of pages to print on each sheet from
[Pages per Sheet].
5 Specify the following settings.
- Select the [Draw Borders]
check box to draw borders between pages
on each sheet.
- Select
[Advanced]>[Page per Sheet Layout]
to set the layout of pages on each sheet.
Note
● [Draw Borders] and [Page per Sheet Layout] are
not available with Windows Server 2003, Windows
XP, and Windows 2000.
6 Congure other settings if necessary and
then start printing.
For Windows XPS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 On the [Setup] tab, select the number
of pages to print on each sheet at
[Finishing Mode].
5 Click [Options].
6 Specify the settings for [Page per
sheet], [Page Borders], [Page
layout] and [Bind Margin], and then
click [OK].
7 Congure other settings if necessary and
then start printing.
For Mac OS X PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Select [Layout] from the panel menu.
4 Select the number of pages to print on
each sheet from [Pages per Sheet].
5 Specify the settings for [Border] and
[Layout Direction].
6 Congure other settings if necessary and
then start printing.
Memo
● If the print dialog contains only two menus and does not
contain the options you expect to see on Mac OS X 10.5
or 10.6, click the button on the side of the [Printer]
menu.