Oki C834DN User Manual

- 130 -
Changing Network Settings From the Web Page
5
5. Network Settings
 Changing Network Settings From the Web Page
This section explains how to change the network settings from the printer’s web page.
To access the printer’s web page, your computer must meet the following conditions.
● TCP/IP must be enabled.
● Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.
Memo
● Ensure that the security setting of the web browser is set to a medium level.
● To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is
“aaaaaa”.
Reference
● Some of the following settings can be performed on other utilities. For details, refer to “Network Setting Items” P.102.
Informing the End of Consumable Life
and Errors by E-mail (E-mail Alert)
You can set the printer to send an error
notication e-mail when an error occurs. You can
set when to be notied:
● On a periodical basis
● Only when an error occurs
Conguring Your Printer
You can congure the settings for e-mail alert
using the web page.
Memo
● When you specify a domain name in [SMTP Server],
congure the DNS server in the [TCP/IP] setting.
● You need to set the mail server to allow the printer to
send E-mail. For details on the mail server setting, ask to
your network administrator.
● If you use Internet Explorer 7, be sure to congure
the settings below before you send a test mail. In the
browser, select [Tools] > [Internet Options], then
click [Custom Level] on the [Security] tab. Then
select [Enable] in [Allow websites to prompt for
information using scripted windows].
1 Access the printer’s web page and log in
as the administrator.
2 Select [Admin Setup].
3 Select [Network Setup]>[Email]>
[Send Settings].
4 Follow the on-screen instructions to
specify detailed settings.
5 Select [Set detail of the SMTP
Protocol].
6 If necessary, you can congure
[Security settings], [Congure
attached information], and [Others].
7 Click [Submit].
The network card reboots to enable the new
settings.
Periodic Alerts
1 Access the printer’s web page and log in
as the administrator.
2 Select [Admin Setup].
3 Select [Network Setup]>[Email]>
[Alert Settings].
4 Enter an e-mail address to receive the
alerts.
5 Click [Setting] for the specied address.
[Copy] is useful when you want to apply the alert
conditions to another address.
6 Follow the on-screen instructions to
specify detailed settings.
7 Click [OK].
8 Click [View a Summary of Current
Conguration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
9 Click [Submit].
The network card reboots to enable the new
settings.
Memo
● Alert e-mail will not be sent if errors to notify about have
not occurred.

Oki C834DN Specifications

General

Brand	Oki
Model	C834DN
Category	Printer
Language	English