- 50 -
Adjusting Color on the Control Panel
2
2. Adjusting Color
Adjusting the Color Balance
(Density)
You can adjust the density of each color. You can
select a light, medium, or dark density for each
color.
Printing Color Swatch
1 Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2 Enter <3>, <0> and <2> using the
ten-key pad and press the <ENTER>
button.
3 Make sure that [Execute] is selected
and then press the <ENTER> button.
A color swatch is printed.
Memo
● On the color tuning pattern, 44 squares are printed. The
present setting of the light, medium, and dark colors are
indicated with dashed lines. You can check the color to be
adjusted.
Adjusting the Color
1 Press the <ENTER> button.
2 Press the scroll button to select
[Calibration] and then press the
<ENTER> button.
3 Press the scroll button to select
[Cyan Darkness], [Magenta
Darkness], [Yellow Darkness] or
[Black Darkness], and then press the
<ENTER> button.
4 Press the scroll button to select
[Highlight], [Mid-Tone] or [Dark],
and then press the <ENTER> button.
5 Press the scroll button or , select
the value you want and then press the
<ENTER> button.
6 Press the <ON LINE> button to exit the
menu mode.
To Next Page
Loading...
Need help?
General
