Oki C930 User Manual

Oki Data CONFIDENTIAL
44043511TH Rev.2
197 /
Table 7-1-1 Operator Alarm (9/9)
Display Cause Error Description and Analysis
Judgement
Remedy
Power Off/on
930: Error
Sub-CPU Clock Frequency
Error
The Sub-CPU clock frequency is not
correct.
Does the error still occur? Yes
Check the connection of the S2P
board.
Replace the S2P board.
Power Off/on
931: Error
Duplex CPU Clock
Frequency Error
The duplex CPU clock frequency is
not correct.Does the error still occur?
Yes
Check the connection of the
V72-18 board.
Replace the V72-18 board.
Power Off/on
932: Error
Inverter CPU
Clock Frequency Error
The inverter CPU clock frequency is
not correct.
Does the error still occur? Yes
Check the connection of the
V72-13 board.
Replace the V72-13 board.
Power Off/on
933: Error
Trya2 CPU Clock Frequency
Error
The tray-2 CPU clock frequency is not
correct.
Does the error still occur? Yes
Check the connection of the
V72-17 board of tray 2.
Replace the V72-17 board.
Power Off/on
934: Error
Trya3 CPU Clock Frequency
Error
The tray-3 CPU clock frequency is not
correct.
Does the error still occur? Yes
Check the connection of the
V72-17 board of tray 3.
Replace the V72-17 board.
Power Off/on
935: Error
Trya4 CPU Clock Frequency
Error
The tray-4 CPU clock frequency is not
correct.
Does the error still occur? Yes
Check the connection of the
V72-17 board of tray 4.
Replace the V72-17 board.
Power Off/on
936: Error
Trya5 CPU Clock Frequency
Error
The tray-5 CPU clock frequency is not
correct.
Does the error still occur? Yes
Check the connection of the
V72-17 board of tray 5.
Replace the V72-17 board.
Power Off/on
940: Error
Waste Toner
Transfer Error
The transfer mechanism of the toner
duct for ID is not operating properly.
Does the error still occur?
Yes
Yes
Yes
Check to confirm that the basket
assembly is in position (if it is
engaged with the gear of the
printer).
Check to confirm that the holder
magnet D contains a magnet, and
check the magnetic polarity.
Replace the HAL IC circuit board.
Replace the duct assembly toner.
Power Off/on
983: Error
Error due to detection of the
toner cartridges of the same
color
Two or more toner cartridges of the
same color are detected.
Install the cartridge of the
specified in the specified position.
Software not
authorized
001
Keychip check failed AS3 PCB KeyChip unmounted or
KeyChip Error is detected.
Power OFF/ON
Replace KeyChip.
Software not
authorized
002
Unauthorized hard disk
copy
The AS3 PCB HDD is not a standard
(official) product.
Power OFF/ON
Replace HDD.
Software not
authorized
003
Unauthorized software
configuration
The AS3 PCB HDD program does not
match the destination.
Power OFF/ON
Replace HDD.
Software not
authorized
004
EEPROM missing The AS3 PCB EEPROM unmounted
or EEPROM Error is detected.
Power OFF/ON
Replace EEPROM.

Oki C930 Specifications

General

Brand	Oki
Model	C930
Category	Printer
Language	English