Oki Data CONFIDENTIAL
44043511TH Rev.2
58 /
3.3 Printer Installation Instructions
• Install a printer under the desired temperature and humidity condition:
Ambient Temperature : 10 to 32°C
Ambient Humidity : 20 to 80% relative humidity
Maximum Wet-Bulb Temperature : 25°C
• Take care not to allow dew condensation on printers.
• When installing printers in an area of which ambient humidity is 30% or less, use a humidifier
or antistatic mat.
Installation Space
• Place a printer on a flat table, which has an adequate space for printer legs.
• Have an adequate room around printer.
Top View
Side View
To Next Page
Loading...
