107
C
HAPTER
6: S
TORE
TO
HARD
DISK
This feature allows print jobs to be created on the PC and stored
on the printer’s hard disk for printing on demand. This is good for
forms, generic memos, letterhead, stationery, etc.
If you use this feature for standard forms, for example, you can
walk up to the C9600 at any time and print off your forms without
having to resend them from the PC.
This feature works in exactly the same way as the secure printing
feature described in Chapter 5, and is available only in the
Windows PostScript and PCL drivers. The difference with job
spooling is that the document is not automatically deleted from
the printer’s hard disk after printing. It remains there for future
use until you delete it from the Printer Control Panel or from your
PC with the Storage Device Manager utility.
NOTE
If this choice does not appear in the driver screens, or if it is
greyed out, check to ensure that the hard disk is enabled in the
printer driver. (See “Setting the driver device options” on page 9.)
Like the secure printing feature, there are three parts in job
spooling:
1. Sending the document
2. Printing the document
3. Deleting a stored document
To Next Page
Loading...
Need help?
General
