102 Sending the document
S
ENDING
THE
DOCUMENT
W
INDOWS
1. If using the PCL driver, in the [Setup] tab choose any
saved driver settings you wish to use. See “Recalling
saved driver settings” on page 8.
2. In the driver’s [Job Options] tab, click [Secure Print].
The Job PIN (Personal Identification Number) window
opens.
If the PIN window does not open, click the [PIN] button.
3. In the Job PIN window, enter a [name] for this print job.
The name may be up to 16 alpha-numeric characters. If
you have more than one print job stored on the printer
when you come to print, you will need a distinctive name
to distinguish between each of your print jobs.
4. If you would like a prompt at the printer for the job name,
click the [Request…] checkbox below the name entry.
To Next Page
Loading...
