1
1-15 Setting up PostScript or PCL printing with Windows 98/Me
TO SET UP SMB PRINTING ON WINDOWS 98/ME
1. Run the OKI LPR utility on the Windows 98 PC.
This utility will have been installed along with the driver if you installed it from the
Drivers CD (CD1). If not, you will first need to install it from the available utilities on
that CD.
2. Choose Permote Print>Add Printer.
Choose the Printer Name of your C9800 from the list of installed drivers.
3. Enter the C9800’s IP address and any comments you wish to add.
N
OTE: You can also locate the printer using the Discover button.
If you are not able to locate your C9800, contact your network administrator.
4. Click OK.
N
OTE: For a description of each print connection, see Chapter 3 of the
Configuration Guide.
To Next Page
Loading...
Need help?
General
