1
1-16 Installing User Software on a Windows Computer
Setting up IPP printing with Windows 98/Me
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over
the Internet.
IPP printing is supported on Windows 2000/XP but can be enabled on
Windows 98/Me computers by installing the wpnpins.exe client file (available on the
Windows Me CD or the Windows 2000 Server CD). For more information about
obtaining and installing this client, contact Microsoft Technical Support.
NOTE: The IPP setup procedures are performed after installing the appropriate printer
drivers. See “To install the PostScript or PCL printer driver for Windows 98/Me” on
page 1-2.
BEFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing.
For more information, see the Configuration Guide.
3. Specify the printing destination on your computer.
TO SET UP IPP PRINTING WITH WINDOWS 98/ME
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, right-click the icon for the Fiery PostScript printer driver and
choose Properties.
3. Click the Details tab and click Add Port.
The Add Port dialog box appears.
4. Enter the network path for the printer.
5. Click OK.
To Next Page
Loading...
Need help?
General
