Oki MC363DN - Copying; Basic Operation

User authentication and access control > 47
PIN AUTHENTICATION
R EGISTERING A PIN
Before enabling user authentication and access control, be sure to register a PIN for each
user. You must be the administrator to register PINs.
To register a PIN for each user, launch Role Manager from Configuration Tool.
E NABLING PIN AUTHENTICATION
You must be the logged on as the administrator to control access to the machine.
1. Open the MFP’s web page.
2. Set Admin Setup > Management > Access Control Setup > Access Control to
Enable, and click Submit.
3. Set Admin Setup > Management > Access Control Setup > Default
authentication method to Authenticate Local PIN, and click Submit.
NOTE
You can also register a PIN from the MFP web page.