Advanced network settings > 54
A
DVANCED
NETWORK
SETTINGS
This chapter explains advanced network settings for your machine.
C
ONFIGURING
THE
WIRELESS
LAN (WPA/WPA2-EAP)
FROM
THE
W
EB
P
AGE
(O
PTIONAL
)
This chapter explains the setting from the web page to connect to a wireless LAN using
WPA/WPA2-EAP for security.
In order to configure from the Web, it is necessary to have completed the settings for wired
or wireless network connection.
If WPA2-EAP is set for the security method, the settings from the IEEE802.1x menu need
to be set beforehand.
IEEE802.1X
SETTINGS
1. Access the machine's web page and log in as the administrator.
The user name is "admin", and the default password is "999999".
Select Admin Setup > Network.
2. Click the IEEE802.1X tab.
Using EAP-TLS:
a) Select Disable for IEEE802.1X.
(Required to use the wireless LAN.)
b) Select EAP-TLS for the EAP Type.
c) Enter a user name in EAP User.
d) Select Do not use SSL > TLS Certificate for EAP authentication and then
click Import.
e) Enter the file name of the certificate. Only a PKCS#12 file can be imported.
f) Enter the password of the certificate and then click OK.
g) Select Authenticate Server and then click Import.
h) Enter the file name of the CA certificate and then click OK.
i) Specify the certificate issued by the certificate authority, which is the certificate
authority from which the RADIUS server obtained the certificate. A PEM, DER, and
PKCS#7 file can be imported.
j) Click Submit.
k) When the main unit comes online, proceed to "WIRELESS(INFRASTRUCTURE)
SETTINGS".
NOTE
IEEE802.1X settings cannot be used simultaneously for the wired and wireless
network.
To Next Page
Loading...
