User authentication and access control > 51
> Server Kerberos: Authenticates with the user information stored in the server
using Kerberos.
10. Click OK.
11. Click OK and then click Print.
Setting User Authentication Options
Set the user authentication options of printer driver from the Device Options tab or
Device Settings tab in Printer.
1. Click Start, and then select Devices and Printers.
2. Right-click OKI MC363 and then select OKI MC363* from Printer properties.
* Driver type (ex. PCL6/PS)
3. For PCL driver, select Device Options and click User Authentication Options....
For PS driver, select Device Options and extend Installable Options.
4. Specifies the user authentication options.
> Set User Authentication Options for each user: Displays Use User
Authentication on the User Authentication dialog box to set whether to enable
or disable user authentication.
5. For the PCL driver, click OK.
6. Click OK.
NOTE
Default authentication type can be set in User Authentication Options... in
the Device Options tab.
If Summary Account Name is displayed, set a type of summary account
(account) to be charged usage amount of printing (points) and name.
If you want to add up for each user and group to which the user belongs, select
a group from Type and specify the group name in Name.
If you want to add up for shared account which multiple users can use, select
a shared account from Type and specify the shard account name in Name.
NOTE
If the Set User Authentication Options for each user check box is clear,
use user authentication and follow the Windows logon method as an
authentication type. When the user has logged on to the domain, Server
LDAP is used and when the user logged on to the local computer, Device
Local is used as the authentication method.
> Input user authentication information when printing: Displays user
authentication setting every time you print. Use this setting when you need to
specify the actual user for each print job under the environment where
multiple users use the same logon account on the same computer.
This option is not available if the Set User Authentication Options for each
user check box is selected.
> Summary Account Name: Enables to set summery account for user
authentication setting.
> Authentication Type: Enables to set authentication type for user
authentication setting.
> Default Authentication Type: Specifies default authentication type which is
used when authentication type cannot be specified.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
