ML620/ML621 User’s Guide 17
Grasp the sheet guide (1). Lift it slightly, then
slide it off the printer.
4. From the back of the printer, locate the tractors
(1).
NOTE: If the tractor assembly is in the front of
the printer, open the front access door, grab the
nger guides (2) on each side and pinch them
together to release the guide. Remove it from the
front and insert it into the back feed and when it
is seated, push down to snap the guides in place.
Close the front access door.
5.
1
2
1
To Next Page
Loading...
