Oki ML620 - Page 50

ML620/ML621 User’s Guide 50
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Front Feed
(Push)
(cont.)
Cut Position Adjust Specify an adjustment value
for where to cut the end of a
continuous form.
–20 ~ –1, 0, +1 ~ +20
TOF Adjust Specify an adjustment value for
the reference position for the Top
of Form position of a continuous
form.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144”
increments.
–20 ~ –1, 0, +1 ~ +20
Continuous Paper Top of
Form
For continuous forms, sets a TOF
in small increments.
1/12” (2.12 mm), 2/12” (4.23 mm),
3/12” (6.35 mm), 4/12” (8.47 mm),
5/12” (10.58 mm), 6/12” (12.70
mm), 7/12” (14.82 mm), 8/12”
(16.93 mm), 9/12” (19.05 mm),
10/12” (21.17 mm), 11/12” (23.28
mm), 12/12” (25.40 mm), 13/12”
(27.52 mm), User Top of Form
LF Revise (Continuous
Paper Line Feed Adjust)
For continuous feed, adjusts the
line feed to the specied amount.
–2, –1, 0, +1, +2