Oki ML620 - Page 51

ML620/ML621 User’s Guide 51
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Front Feed
(Push)
(cont.)
Centering Position Used to limit printhead travel
when printing narrow columns.
Select Mode 1 for ML620. Select
Mode 1 or Mode 2 for the ML621.
Default, Mode1, Mode2
Pull Line Spacing Change to 8 lines per inch (lpi) to
get more lines on a page.
6 LPI, 8 LPI
Skip Over Perforation Specify whether to skip over
perforations or not. When a skip-
over command is received, it is
given priority. If your software has
its own page formatting controls,
leave the default setting. To set
the printer to go to the next page
when it comes within 1” (25 mm)
of the bottom of the page, change
the setting.
No, 25.4 mm (1”)
Page Width (only
displayed for ML621)
4
Change to 8” to print on narrow
paper.
13.6”, 8”