Oki ML620 - Page 53

ML620/ML621 User’s Guide 53
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Cut Sheet
Top Feed
(cont.)
Page Width (only
displayed for ML621)
4
Change to 8” to print on narrow
paper.
13.6”, 8”
Page Length Specify the length of a cut sheet
page.
3” (76.2 mm), 3.25” (82.6 mm),
3.33” (84.7 mm), 3.5” (88.9 mm),
3.66” (993.1 mm), 4” (101.6 mm),
5” (127 mm), 5.5” (139.7 mm), 6”
(152.4 mm), 7” (177.8 mm), 8”
(203.2 mm), 8.5” (215.9 mm), 11”
(279.4 mm), 11.7” (296.3 mm),
12” (304.8 mm), 14” (355.6 mm),
17” (431.8 mm)
Initial Position
6
[Displayed when connected
to RPS]
Paper position (print or cut) when
printer is powered on.
Print position, Cut position
Cut Position Adjust
6
[Displayed when connected
to RPS]
Specify an adjustment value for
where to cut the roll paper.
–20 ~ –1, 0, +1 ~ +20
Wait Time Specify the wait time from when
the paper is set on the tray to
when the printer feeds it.
Invalid, 0.5 sec, 1 sec, 1.5 sec,
2 sec, 3 sec
Paper Length Control Specify the page length of a cut
sheet.
by Menu Setting, by Actual Page
Length