Oki ML620 - Page 54

ML620/ML621 User’s Guide 54
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Cut Sheet
Top Feed
(cont.)
Cut Sheet Auto Eject
Position
For cut sheets, when it reaches
the selected measurement,
measured from the bottom of the
page, it ejects the paper.
.25” (6.35 mm), .5” (12.7 mm),
7/12” (14.82 mm), Invalid
TOF Adjust Specify an adjustment value for
the reference position for the Top
of Form position.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144”
increments.
–20 ~ –1, 0, +1 ~ +20
Cut Sheet Top of Form Specify an adjustment value for
the reference position for the
Top of Form when feeding a cut
sheet (up to the mid-section of
characters in the rst line).
1/12” (2.12 mm), 2/12” (4.23 mm),
3/12” (6.35 mm), 4/12” (8.47 mm),
5/12” (10.58 mm), 6/12” (12.70
mm), 7/12” (14.82 mm), 8/12”
(16.93 mm), 9/12” (19.05 mm),
10/12” (21.17 mm), 11/12” (23.28
mm), 12/12” (25.40 mm), 13/12”
(27.52 mm), User Top of Form
LF Revise Adjust the line feed in cut sheet
mode.
–14 ~ –1, 0, +1 ~ +14