ML620/ML621 User’s Guide 55
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Cut Sheet
Top Feed
(cont.)
Centering Position Used to limit printhead travel
when printing narrow columns.
Select Mode 1 for ML620. Select
Mode 1 or Mode 2 for the ML621.
Default, Mode1, Mode2
Cut Sheet
Front Feed
Line Spacing Change to 8 lines per inch (lpi) to
get more lines on a page.
6 LPI, 8 LPI
Page Width (only
displayed for ML621)
4
Change to 8” to print on narrow
paper.
13.6”, 8”
Page Length Specify the length of a cut sheet
page.
3” (76.2 mm), 3.25” (82.6 mm),
3.33” (84.7 mm), 3.5” (88.9 mm),
3.66” (993.1 mm), 4” (101.6 mm),
5” (127 mm), 5.5” (139.7 mm), 6”
(152.4 mm), 7” (177.8 mm), 8”
(203.2 mm), 8.5” (215.9 mm), 11”
(279.4 mm), 11.7” (296.3 mm),
12” (304.8 mm), 14” (355.6 mm),
17” (431.8 mm)
Wait Time Specify the wait time from when
the paper is set on the tray to
when the printer feeds it.
Invalid, 0.5 sec, 1 sec, 1.5 sec,
2 sec, 3 sec
To Next Page
Loading...
