Oki ML620 - Page 56

ML620/ML621 User’s Guide 56
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Cut Sheet
Front Feed
(cont.)
Paper Length Control If you are printing single sheets
no longer than 17 inches and wish
the printer to acknowledge the
menu setting for Top Feed Page
Length, change the setting to “by
Menu Setting.”
by Menu Setting, by Actual Page
Length
Cut Sheet Auto Eject
Position
For cut sheets, when it reaches
the selected measurement,
measured from the bottom of the
page, it ejects the paper.
.25” (6.35 mm), .5” (12.7 mm),
7/12” (14.82 mm), Invalid
TOF Adjust Specify an adjustment value for
the reference position for the Top
of Form position.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144”
increments.
–20 ~ –1, 0, +1 ~ +20
Cut Sheet Top of Form Specify an adjustment value for
the reference position for the
Top of Form when feeding a cut
sheet (up to the mid-section of
characters in the rst line).
1/12” (2.12 mm), 2/12” (4.23 mm),
3/12” (6.35 mm), 4/12” (8.47 mm),
5/12” (10.58 mm), 6/12” (12.70
mm), 7/12” (14.82 mm), 8/12”
(16.93 mm), 9/12” (19.05 mm),
10/12” (21.17 mm), 11/12” (23.28
mm), 12/12” (25.40 mm), 13/12”
(27.52 mm), User Top of Form