ML620/ML621 User’s Guide 63
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
FF Function Set the feeding operation upon
receiving an FF code after cut
sheet paper is fed.
Eject, Form Feed
Cut Sheet Park Function To enable paper feed out of the
cut sheet feeder, set to Valid.
Invalid, Valid
Feed Up when Menu
Printing
To move the paper to the top
cover to see the Menu printing,
set to Yes.
No, Yes
Parallel I/F I-Prime Determines what the printer will
do when it receives the I-Prime
signal from the software.
Buffer Print: prints out the buffer
contents before resetting.
Buffer Clear: dumps the buffer
contents immediately.
Invalid: causes the printer to
ignore the I-Prime command.
Select this setting if you wish
to enter settings through the
printer’s control panel which will
not be automatically overridden by
the software’s settings when the
I-Prime signal is sent.
Buffer Print, Buffer Clear, Invalid
To Next Page
Loading...
