Oki ML620 - Page 62

ML620/ML621 User’s Guide 62
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Reverse Feed Control In reverse feed the paper is
reverse fed back to the original
printing position.
TOF Stop, TOF Over
Print Direction at DH
Mode
Set the print direction when
printing double-height characters.
In uni-directional printing the
print head only moves from left
to right; in bi-directional printing
the print head moves in both
directions.
Uni-directional, Bi-directional
Sleep Mode Default setting saves power by
having the printer go into sleep
mode; when disabled the printer
never goes into sleep mode.
Enable, Disable
Sleep Time Set the idle time before the printer
enters sleep mode (when Sleep
Mode is enabled).
5 min, 10 min, 15 min, 30 min,
60 min
Paper End In default setting when paper end
is detected, printer remains on-
line; if set to Off-line, when paper
end is detected, printer goes off-
line.
On-line, Off-line