ML620/ML621 User’s Guide 61
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Host Interface Set which interface the printer
uses to receive printing
commands.
Auto Interface, Parallel, USB,
Optional
I/F Time Out Sets the length of time before the
interface switches to idle status
when no printing commands have
been received.
15 sec, 30 sec, 45, sec, 1 min,
2 min, 3 min, 4 min, 5 min
ESC SI Pitch
8
(only
displayed for IBM
Emulation)
Sets the character pitch used
when the ESC SI command is
received.
17.1 cpi, 20 cpi
Select Language Set
9
(only displayed for
EPSON Emulation)
Select “combined” to set both
country and language; select
“code page only” for language
only.
Combined, Code Page Only
Print Style Sets the printer impact mode. Normal, High Speed, Quiet, High
Copy
Select Quiet Mode Quiet modes print slower and
quieter. In Mode1, the printer
makes one pass; in Mode2, two
passes.
Mode1, Mode2
Select High Copy Mode High copy modes set the printer
to print more forcefully. Mode1
is a double-strike print; Mode2 is
triple-strike, etc.
Mode1, Mode2, Mode3, Mode4
To Next Page
Loading...
