Oki ML620 - Page 60

ML620/ML621 User’s Guide 60
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
SI Select Pitch (10 cpi)
8
(only displayed for IBM
Emulation)
Sets the pitch to be engaged when
the printer control panel is set
for 10 cpi and the SI command is
received.
15 cpi, 17.1 cpi
SI Select Pitch (12 cpi)
8
(only displayed for IBM
Emulation)
Sets the pitch to be engaged when
the printer control panel is set
for 12 cpi and the SI command is
received.
12 cpi, 20 cpi
Time Out Print If your software spends a long
time processing between portions
of data it feeds to the printer,
change the setting to Invalid to
keep your printer from dumping
the received data while it is
waiting for more.
Valid, Invalid
Auto Select Determines whether or not your
printer will automatically be
selected after you load in paper.
If you always use the same Top
of Form position, keep the default
setting of “Yes”. When set to “No”,
the printer will be deselected so
that you can set the Top of Form.
No, Yes