Oki ML620 - Page 59

ML620/ML621 User’s Guide 59
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Operator Panel Function
3
Set control panel operation.
Limited operation locks functions
on the control panel; only SEL,
LOAD/EJECT, and TEAR keys work.
Full Operation, Limited Operation
Reset Inhibit To prevent a reset signal from
the computer from resetting the
printer to its defaults, set to Yes.
No, Yes
Print Suppress Effective Set whether to enable or disable a
print suppress setup command.
No, Yes
Auto LF Set whether to perform automatic
line feed operation or not upon
receiving a CR code. If your
printout is consistently double-
spaced, select No; if it overprints,
select Yes.
No, Yes
Auto CR
8
(only displayed
for IBM Emulation)
If you want the printer to
automatically add a carriage
return when a Line Feed is
received at the end of a line,
change the setting to “Yes.”
No, Yes
Print DEL Code
7
(only displayed for ML
Emulation)
To print the DEL code (decimal 27)
as a solid box, set to Yes.
No, Yes