Oki ML620 - Page 58

ML620/ML621 User’s Guide 58
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Print Registration 1 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 2 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 3 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 4 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
7 or 8 Bits Data Word
7
(only displayed for ML
Emulation)
Change this setting to 7 if your
system uses 7-bit data word
lengths.
8, 7