Oki N36800B - Page 120

Changing settings from the operator panel
- 120 -
Item
Factory
default
settings
Description
PDF Paper Size Current Tray
Size
Specifies the paper size for direct printing of
PDF files.
PDF Scaling Size 99% Set the reduction ratio when [Scaling Size]
is selected in [PDF Paper Size].
PDF Print Mode Quality
priority
Sets whether to prioritize print quality or
print speed when a PDF is printed.
PCL Setup
Font Source
Resident2
Selects the location of the font to be used.
Font Number C1 Selects the number of the font to be used.
Value range: I0 to I90 when [Resident] is
set; or C1 to C4 when [Resident2] is set
Font Pitch 10.00 CPI Sets the PCL font width.
Value range: 0.44 to 99.99 CPI (in
increments of 0.01 CPI)
Font Height 12.00 points Sets the PCL font height.
Value range: 4.00 to 999.75 points (in
increments of 0.25 points)
Symbol Set
WIN3.1J
Selects the symbol set of PCL.
A4 Print Width 78 column Sets the number of columns until an auto
carriage return on A4 paper.
White Page Skip
Off
Selects whether or not to print blank pages.
CR Function CR Sets the operation of this machine when
receiving a CR code.
LF Function LF Sets the operation of this machine when
receiving an LF code.
Print Margin
Normal
Sets the unprintable area of the paper.
True Black Off Sets whether to use composite black
(CMYK mixed color) or pure black (K only)
for the black color (100%) of image data.
Pen Width Adjust On Sets whether to emphasize fine lines and
make them thicker.
Tray ID#
MPTray
4
Sets the value to specify the tray with the
output specification command of PCL.
Value range: 1 - 59
Tray1
1
Tray2
5
Tray3
20
Tray4
21
SIDM Setup SIDM Manual ID# 2 Sets up Pn specified in MANUAL by
MANUAL-1 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
SIDM Manual2 ID# 3 Sets up Pn specified in MANUAL by
MANUAL-2 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
SIDM MP Tray ID# 4 Sets up Pn specified TRAYO (MP Tray) by
MP Tray ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
SIDM Tray1 ID# 1 Sets up Pn specified TRAY 1 by Tray 1 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).
SIDM Tray2 ID# 5 Sets up Pn specified TRAY 2 by Tray 2 ID
No.FX/ PPR Emu in CSF control command
(ESC EM Pn).