Changing settings from the operator panel
- 121 -
Item
Factory
default
Description
SIDM Tray3 ID# 6 Sets up Pn specified TRAY 3 by Tray 3 ID
No.FX/ PPR Emu in CSF control command
SIDM Tray4 ID# 7 Sets up Pn specified TRAY 4 by Tray 4 ID
No.FX/ PPR Emu in CSF control command
IBM PPR
Setup
Character Pitch 10 CPI Specifies character pitches in IBM PPR
Font Condense 12 CPI to 20
Specifies 12CPI pitches for Condense
Specifies a character set.
Letter O Style Disable Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
CR Function CR Selects a carriage return from [CR] or
Selects a line feed from [LF] or [LF+CR].
Specifies the number of characters per line.
Form Length 11.7 inch or
*1
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of
Left Margin 0.0 inch Specifies the distance from the left edge of
paper so that the print starting point shifts to
Fit to Letter Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
Text Height Same Sets the height of a character.
Same: The height stays the same
regardless of CPI.
Diff: The height varies according to CPI.
EPSON FX
Setup
Specifies character pitch.
Specifies a character set.
Letter O Style Disable Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
CR Function CR Select a carriage return from [CR] or
Specifies the number of characters per line.
Form Length 11.7 inch or
*1
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of
To Next Page
Loading...
