Oldham iTrans 2 User Manual

45
Entering Programming Mode and Selecting a Channel
On entering the correct password,
the channel selection screen will be
displayed on the LED display. Press
the “Mode” button to switch
between the available channels then
press the “ ” button to confirm the
channel selection.
Once a channel is selected, the gas
type for that sensor is displayed on
the top row of the LED display for 5-
7 second. After that the LED display
will show the list of available
functions. Use the arrow keys to
scroll through the list of functions
available.
Figure 5-15 Sample Channel Selection
Display
NOTE: If you have a dual-sensor unit, use the “Mode” button to switch
between the channel.

Oldham iTrans 2 Specifications

General

Brand	Oldham
Model	iTrans 2
Category	Measuring Instruments
Language	English