10044 Planer OLIVERMACHINERY.NET 13 | Page
Electricals
WARNING
All electrical work must be done by a qualified electrician and must meet the
electrical code in your area.
Minimum Circuit Size Required for Model 10044 Planer
Minimum Circuit Size Required
Please ensure the electrical circuit for this machine meets the minimum circuit size requirement. The
minimum circuit size requirement applies to a dedicated circuit that provides power to one 10044 Planer
.
If more items are sharing the same circuit, consult a qualified electrician to ensure the designated circuit
is properly sized for safe operation.
If a circuit is available, but not meeting the minimum circuit size requirement listed above, a new circuit
must be installed for this machine.
Grounding
WARNING
Improper grounding can cause electric shock, fire, and equipment damage.
Proper grounding reduces the risk to the operator in the event of electrical malfunction or breakdown.
This machine must be connected to the grounding conductor when available, and all grounding
connections must meet or exceed the electrical code requirements in your area. Furthermore, all grounds
must be verified and must meet or exceed the electrical requirement of the machine. If grounding is not
available, consider the use of a GFCI protection device as an alternative, if this complies with the electric
code in your area.
Indoor Use Only
This machine is designed for indoor use only. Operating this machine outdoor increases its exposure to
moisture, which in turn increases the risk of electric shock.
Electrical Wiring
This machine is pre-wired for 120V with a cord and plug. Use of extension cord is not recommended. If
you need to use an extension cord to connect to a power source, select a durable cord type with a high-
temperature rating (90C° or above). Use the minimum amount of extension cord as needed.
To Next Page
Loading...