10044 Planer OLIVERMACHINERY.NET 5 | Page
Introduction
Thank you for choosing Oliver! This manual contains important information on how to safely set up,
operate, and maintain this machine. Please take the time to read through this manual, and make sure you
understand all instructions.
While this manual may provide tips on optimizing the result of your workpiece, the manual is not intended
as a substitute for formal woodworking training. If you need to know how to safely complete a
woodworking task, please consult knowledgeable and qualified sources before proceeding further.
We made every effort to keep this manual up-to-date. Instructions, specifications, drawings, and
photographs in this manual should match the machine delivered. If you find any differences, or anything
that seems confusing in this manual, or some instructions are not available, please check our website for
an updated version:
WWW.OLIVERMACHINERY.NET/MANUALS
Alternatively, you can contact our technical support for help:
1-800-559-5065
Before calling, please note down the manufacture date and the
serial number of the machine. You can find the information on a
nameplate located on the back of the motor housing. This
information is needed to provide proper technical support, and to
determine if an updated manual is available for your machine.
Please let us know how well this manual serves you. If you have
any suggestions, please call the number above or email us at:
info@olivermachinery.net
We love to hear from our customers and make improvements.
To Next Page
Loading...
