Need help?Do you have a question about the Oliver M-1013 and is the answer not in the manual?
General| Brand | Oliver |
|---|---|
| Model | M-1013 |
| Category | Power Tool |
| Language | English |
i-Picture is free software for the intelliCarve series that can automatically output NC code from image files.
Engraving machine that transfers digital images or photographs onto material.
Highlights ease of use, light weight, and versatility of the machine.
Lists all items included in the standard packaging for the intelliCarve.
Identifies and labels the main physical components of the intelliCarve machine.
Defines the X, Y, and Z axis movements and directional terminology.
Detailed specifications and information for the conical cutting bit.
Detailed specifications and information for the end mill cutting bit.
Instructions on how to load image files into the i-Picture software.
Configuration options for project size, scan step, and tool type in i-Picture.
Setting the starting point for the carving project within the software.
How to preview the carving project before saving and converting.
Steps to convert image files into a G-code file for the intelliCarve.
Step-by-step guide to safely power on the intelliCarve machine.
Instructions for correctly positioning and securing the material on the machine table.
Guide to the initial setup and checks via the control panel interface.
Process for manually setting the carving origin point using the control panel.
Finalizing origin points and selecting the appropriate carving speed.
Advice on using sacrificial boards and creating lithophanes with the machine.
Using third-party CAD/CAM software with the intelliCarve.
How to re-run a project using the previously set origin point.
Moving the spindle precisely using coordinate values.
Steps to turn the spindle motor on or off while in manual jog mode.
Guide to switching measurement units between millimeters and inches.
Diagnosing issues when the unit fails to power on or operate.
Troubleshooting when the display is active, but the machine remains unresponsive.
Resolving problems with control panel operation and front LED indicators.
Addressing issues related to improper or non-functional movement of the machine axes.
Troubleshooting steps for when axes fail to move during carving.
Solutions for dealing with unusual noise or vibration during machine operation.
Identifying causes and solutions for the cutting bit breaking.
Fixing issues where the carved result differs from the file or appears blurry.
To Next Page
