Overview
Software
i-Picture is free software for the intelliCarve series that can automatically output NC code from image files
such as jpg, png, gif or bmp files. Oliver Machinery will continue to review the software and will provide new
releases when available at no charge to the original owner.
intelliCarve
With the output NC code from i-Picture, the intelliCarve is a very unique engraving machine that allows the
user to transfer digital images or photographs onto a material such as wood, corian, acrylic or plastic.
What makes the intelliCarve so unique?
1. Easy
intelliCarve users only need plug the USB into the intelliCarve, then select a file for carving and push a few
buttons to complete the carving. Knowledge of CAD/CAM software is not necessary.
2. Light
i-Picture comes free with the intelliCarve and does not need a high level computer system to operate such
as what is usually needed for CAD/CAM software. And iCarver is only 62lbs!
3. Versatile
For users with CAD/CAM capabilities, i-Picture will accept G code from after market software providers to
aid in the creation of simple 2D or 3D carvings, signs, or decorative mouldings *.
*request a ‘post processor file’ from your CAD/CAM software provider to run the intelliCarve machine.
Note: Oliver does not guarantee the outcome of the work piece due to
the table movement of the Y-axis.
To Next Page
Loading...
Need help?
General
