d-Color MF 3300/3800 3-7
3.2 Checking the option configuration
3
3.2 Checking the option configuration
List of optional components
No. Name Description
1 Authentication Unit
AU-201
Performs user authentication by scanning information recorded on
the IC card.
2 Working Table
WT-P02
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit or Finisher is in-
stalled.
3 Finisher FS-P03 Staples the printed sheets.
For staples, use Staple Kit SK-501.
4 Keypad KP-101 Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
5 Paper Feed Unit
PF-P13
Allows you to load up to 500 sheets.
There are two slots in which the Paper Feed Unit can be installed.
6 DESK DK-P03 Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
The following optional components are built into this machine and are not shown in the figure above.
7 Fax Kit FK-512 Used to operate this machine as a fax machine.
This is provided as standard on d-Color MF 3800 models sold in
North America.
8 Mount Kit MK-738 This unit is required to install the Fax Kit.
This is provided as standard on d-Color MF 3800 models sold in
North America.
9 i-Option LK-106 Used to add a bar code font, which is one of special fonts.
56
2
1
3
4
To Next Page
Loading...
Need help?
General
