Network Configuration> 10
1. Insert the Network Software CD-ROM into the CD-ROM
drive. The Setup Utility starts automatically. If it does not
start, double-click \setup.exe (in the root directory) on
the CD-ROM.
2. Select [Network Card Setup]—[Network Card Quick
Setup].
3. Select the appropriate language and follow the on-screen
instructions.
4. When the settings are correct, click [Execute]. The new
settings are transmitted to the network card but it still
operates with pre-transmission settings.
5. Click [Finish] to validate the new settings. The printer may
have to be switched off for 15 seconds and on again.
To Next Page
Loading...
Need help?
General