Microsoft Windows> 62
7. Click the [Close] button in the [Local Area Connection
Status] dialogue box.
W
INDOWS
XP
1. Although you can install the NetBEUI protocol into
Windows XP, it is not supported. You should be able to use
NetBEUI on LAN connections although you will not be able
to use this on a Remote Access Service Connections.
2. In the [Start] menu, select [Settings] then [Control
Panel].
3. Double-click on [Network Connections].
4. Right-click the adapter you wish to add NetBEUI to and
then click [Properties].
5. On the [General] tab, select [Install].
6. Select [Protocol] and then [Add].
7. Select [Have Disk] and insert your Windows XP CD-ROM,
open the [Valueadd\msft\net\netbeui folder], click the
Netnbf.inf file and then click [Open].
Now the printer has been configured and NetBEUI has been
installed, you can configure Windows to print over the network.
P
RINTER
DRIVER
CONFIGURATION
In the following example, the printer has been configured as
follows:
1. Set up the printer driver as the default local printer.
2. In the [Start] menu, select [Settings] then [Printers].
3. Select the relevant printer driver, then [Properties].
4. Click on the [Details] tab in the printer driver.
5. Select [Add Port]. Select [Network] and click [Browse].
6. Double-click [Entire Network], [PrintServer] and
[OL07DB85].
Computer Name: OL07DB85
Workgroup: PrintServer
Comment: Ethernet Board 8100e
To Next Page
Loading...
Need help?
General