Novell NetWare> 65
P
RINTING
THE
CONFIGURATION
PAGE
The printer’s configuration page reports information that is
required for NetWare configuration. To print a configuration
page, while the printer is switched on, depress the NIC’s push-
button for three seconds and then release.
The information that you require is the printer’s Ethernet
address. The first six characters of the Ethernet address are the
same for all network interfaces. The last six characters of the
Ethernet address are unique to each card
This is all the information that is required to setup the printer for
NetWare.
S
ETUP
UTILITIES
Use NWAdmin32 or the Pconsole utility to create and setup
NetWare printer objects. Please refer to Novell documentation for
instructions on how to achieve this.
Use the Network Card Setup
Utility (AdminManager) or
other printer manager
software, (Web browser,
JetAdmin, etc.) to configure the
network interface card. For
instructions please refer to the
Configuration Utility section
and online help. The illustration
here shows the NetWare
configuration page from
AdminManager.
NDPS G
ATEWAY
This provides a gateway for NDPS. Gateways allow NDPS clients
to send jobs to printers that are not NDPS-aware (that is, printers
that are not equipped with embedded NDPS Printer Agents). You
select and configure a printer gateway when you create a new
Printer Agent.
To Next Page
Loading...
Need help?
General