UNIX> 75
If there is no reply, there is a problem with the
configuration of the IP address (the IP address has already
been set manually or dynamically), or with the network.
Reset the network interface card settings to default and try
to set a temporary IP address. If you still have the problem
after resetting the network interface card, consult the
network manager.
5. Register the network card as a remote printer server.
Example: for host name c7350
(a) Stop the print scheduler.
# usr/sbin/lpshut
(b) Create the printer queue.
# /usr/sbin/lpadmin -p c7350_lp -v /dev/
null \
-m netstandard -o dest=c7350:lp
-o protocol=bsd
(c) Set the queue to accept PostScript print jobs.
# /usr/sbin/lpadmin -p c7300v2_lp -I
postscript
(d) Start the print scheduler.
# /usr/sbin/lpsched
(e) Activate the print queue.
# /usr/sbin/accept c7350_lp
(f) Enable the print queue
# /bin/enable c7350_lp
To customise output, for example to add additional commands at
the start of each print job, you can edit a copy of the netstandard
model file then add it using the lpadmin command.
Example: for printer c7350_lp, with model file called
c7350_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin –p c7350_lp –m c7350_model
# /usr/sbin/lpsched
To Next Page
Loading...
Need help?
General