CASH REGISTER UNPACKING AND SETUP
STANDARD ACCESSORIES
The cash register comes with the following items:
• One standard paper roll
• Three standard ‘AN’ size batteries for the battery back-up system
• The multilingual User’s Guide, Reference Guide in English and Warranty Card + Setup Poster
• A set of keys for locking the cash drawer
Make sure that the cash register and all of the above items are included in the shipping carton.
Open the cash register’s shipping carton and carefully withdraw each component. Make sure that the cash
register and all its accessories, listed in the section entitled Standard Accessories, are present in order to
setup the cash register by following these guidelines:
1. Place the cash register on a level, stable, vibration-free and dust-free surface. Make sure it is near a
power outlet compliant will the latest safety standards.
1. Plug the cash register into a power outlet compliant with the latest safety standards.
2. Insert memory backup batteries as explained in the section entitled Inserting/Replacing Batteries. Do not
insert the batteries unless the cash register is plugged into an electrical power outlet.
WARNING A
The machine must be plugged into an electrical outlet before you insert the batteries.
1. Load the thermal paper roll as explained in the section entitled Loading Thermal Paper.
2. Set the desired program options as explained in the section Cash Register Programming.
PRINTER COMPARTMENT
The printer compartment is on the top Ieft-hand side of the cash register. It houses the thermal paper roll,
journal winder spindle, back-up batteries and the thermal printer. This cash register uses standard 2 1/4”
(57 mm) thermal paper.
Y119070-7 Service Manual 1-5
To Next Page