40
3. Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4. Press the keys
until the display shows:
TAD SET-UP
OGM 2
5. Press the key:
The display shows:
OGM 2
PLAY
6. Press the keys
until the display shows:
OGM 2
DELETE
7. To erase outgoing message 2 recorded previously,
press the key:
The display shows:
DELETE?
NO
8. To view the other available option, "DELETE? - YES",
press the keys:
9. To confirm the setting, press the key:
10. To return the fax machine to the initial stand-by mode,
press the key:
TO RECORD THE TRANSFER MESSAGE
Record the transfer message as you recorded OUTGOING
MESSAGE 1, modifying the step 4 as follows:
Press the
keys until the display shows:
TAD SET-UP
OGM 3
notE
Bear in mind however that you only have 10 seconds.
TO LISTEN TO THE TRANSFER MESSAGE
Play back the transfer message as you played back OUTGO-
ING MESSAGE 1, modifying the step 4 as follows:
Press the
keys until the display shows:
TAD SET-UP
OGM 3
TO RECORD MEMOS
As mentioned previously, the telephone answering de-
vice may be used to record one or more memos, which
are handled in the same way as incoming messages.
1. Press the key:
The display shows:
RECORD MEMO MSG
LIFT HANDSET
2. Lift the handset.
The display shows:
RECORD MEMO MSG
<|> TO RECORD
3. To start recording, press the key:
The display shows:
RECORDING 30
notE
You have 30 or 60 seconds at your disposal (see "To set
the length of memos and incoming messages") to record
your memo in the same way as OUTGOING MESSAGES 1
and 2.
To Next Page
Loading...
